• LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS AH40 Shipbuilding steel plate
  • Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,AH40 steel plate is mainly used for shipbuilding and oil platform, the shipbuilding grade AH40 can be used in the manufacture of the ship s hull structure, whose weight is more then 10000 tons.  Shipbuilding grade AH40  is the high tensile strength steel,  AH40 steel for shipbuilding and oil platform must be good toughness properties, higher strength, strong corrosion-resistance, the processing properties, and welding properties.

    AH40 shipbuilding steel plate specification:
    Thickness: 6mm-200mm, Width: 1500mm-4000mm, Length: 6000mm-180000mm

    The AH40 steel plate Chemical Composition %


    Grade

    C max

    Si max

    Mn

    P max

    S max

    Als min

    Ti max

    Cu max

    Cr
    max

    Ni
    max

    Mo
    max

    Nb

    V

    AH40

    0.18

    0.50

    0.90-1.60

    0.035

    0.035

    0.015

    0.02

    0.35

    0.20

    0.40

    0.08

    0.02-0.05

    0.05-0.10

    Note: Generally speaking CE will be 0.40%. If the delivery condition is TMPC, the CE will be : ≤ 0.40% (thickness ≤ 50mm). Ceq% =(C+Mn)/6+(Cr+Mo+V)/5+(Ni+Cu)/15.

    The AH40 steel plate Mechanical Property


    Grade

    Rm
    (MPa)

    Re(MPa) min

    A% min

    Akv/J min

    AH40

    510-660

    390

    20

    E.T °C

    Thickness (mm)

    0

    50

    >50-70

    >70-100

    L

    C

    L

    C

    L

    C

    41

    27

    -

     Note: In the list , Rm: tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.

    Condition Of Delivery


    Grade

    Fine grains elements

    category

    The thickness of steel

    ≤ 12

    >12.5-20

    >20-25

    >25-35

    >35-50

    >50-100

    AH40

    any

    Plate/
    sheet

    A(50)

    N(50),CR(50),TM(50)

    -

    Profile steel

    Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
    2.  The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.

    AH40 steel plate Available Specification


    variety
    Thickness (mm) Width (mm) Longth/ inner diameter (mm)
    Shipbuilidng plate cutting edges 6~200 1500~3000 3000~15000
    non- cutting edges 1300~3000
    Shipbuilidng coil cutting edges 1.2~19 1500~2000 760+20~760-70
    non-cutting edges 1510~2010

    AH40 steel plate theoretical weight


    Thickness (mm)
    theoretical weight Thickness (mm) theoretical weight
    Kg/ft2 Kg/m2 Kg/ ft2 Kg/m2
    6 4.376 47.10 25 18.962 196.25
    7 5.105 54.95 26 20.420 204.10
    8 5.834 62.80 28 21.879 219.80
    10 7.293 78.50 30 23.337 235.50
    11 8.751 86.35 32 25.525 251.20
    12 10.21 94.20 34 26.254 266.90
    14 10.939 109.90 35 27.713 274.75
    16 11.669 125.60 40 29.172 314.00
    18 13.127 141.30 45 32.818 353.25
    20 14.586 157.00 48 35.006 376.80
    22 16.044 172.70 50 36.464 392.50
    24 18.232 188.40

    AH40 steel plate dimensional deviation


    nominal thickness(mm)
    The thickness deviation with following width (mm)
    ≤1200 >1200~1500 >1500~1800 >1800
    >6.0~8.0 ±0.29 ±0.30 ±0.31 ±0.35
    >8.0~10.0 ±0.32 ±0.33 ±0.34 ±0.35
    >10.0~12.0 ±0.35 ±0.36 ±0.37 ±0.43

    nominal thickness(mm)


    minus deviation (mm) The thickness deviation with following width (mm)
    > 1000 ~1200 > 1200 ~1500 > 1500 ~1700 > 1700 ~1800 > 1800 ~2000 > 2000 ~2300 > 2300 ~2500 > 2500 ~2600 2600 ~2800 > 2800 ~3000
    >12~25 -0.8 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.8 +1.0 +1.1 +1.2
    >25~30 -0.9 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.1 +1.2
    >30~34 -1.0 +0.2 +0.3 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.2 +1.3
    >34~40 -1.1 +0.3 +0.4 +0.5 +0.6 +0.7 +0.9 +1.0 +1.1 +1.3 +1.4
    >40~45 -1.2 +0.4 +0.5 +0.6 +0.7 +0.8 +1.0 +1.1 +1.2 +1.4 +1.5